NL

Tracking bergs: Holyrood company uses drone to put GPS on iceberg

RPM Aerial Services created a custom container for a GPS tracker, and successfully lowered it onto an iceberg using a drone.

Goal of pilot project goal to find safe, cost-effective way to monitor massive pieces of ice

The drone returns to the boat after successfully placing a tracker on this iceberg off Petty Harbour. (RPM Aerial Services )

It was a tricky operation in heavy fog, but a company based in Holyrood recently used a drone to place a GPS tracker on an iceberg about two kilometres outside Petty Harbour.

Brian Lundrigan's company, RPM Aerial Services, partnered with a GPS manufacturer in Nova Scotia for the pilot project, which aimed to find a safe way to place a tracker on an iceberg without getting too close to the often unpredictable masses of floating ice.

"It was fairly challenging. The biggest difficulty was depth perception when you're a distance away from the iceberg, trying to see how close you are," said Lundrigan, who started the remotely piloted aerial service company about a year ago.

Company places GPS device on iceberg

7 years ago
Duration 0:44
Holyrood company uses drone to put tracker on iceberg.

"Traditionally GPS trackers have been put on icebergs by other means. We believe UAV [unmanned aerial vehicle] technology could be used to do this cost-effectively and safely," said Lundrigan.

How it was done

He used a 3D printer to create a custom carrier for the tracking unit, which was attached by a rope to the drone.

Coming up with a way to keep the tracker on the slippery surface of ice was also part of the challenge.

So Lundrigan added spikes to the carrier, and designed it to roll so they would know when it came off the berg.

The carriage for the tracker was made of printed plastic, with spikes to keep it on the ice. (RPM Aerial Services )

He operated the drone from a boat about 100 metres away from the iceberg, and flew it with the 800-gram tracker dangling from a 15-metre rope.

Federal regulations don't allow operators to drop anything from drones, so Lundrigan had to carefully place the tracking unit on the berg, where it stayed for 12 hours before slipping off.

"This was a demonstration project that we could do it, and not just for GPS trackers but for any technology."

After the tracker was placed the tether was released. The drone was equipped with three cameras. Lundrigan's view while operating is superimposed in the top left corner. (RPM Aerial Services )

Lundrigan said perfecting the process for other applications — such as attaching sensors to measure the heave, pitch and roll of icebergs — would be beneficial for the offshore oil industry.

"When an iceberg is a threat, understanding how big that iceberg is, its properties, would be very valuable," said Lundrigan. 

"So maybe other sensors measuring heave, pitch and roll, being able to tell the size of the iceberg would be very important to supply vessels that have to deal with these threats."

With files from the St. John's Morning Show